Swing ITM Series Hydraulic Motor

Categories: Radial Piston Hydraulic Motor
Brand:STF
Model:low speed, high torque
Comments:flat compensation distributing structure;high starting torque;excellent stability at low speed
Update Time:11/28/2012

Detailed Info

ITM series'hydraulic motor is a traditional radial piston motor what we produce for mid-pressure application.

With advanced processing center, inspection machines and assembly technology, ITM series'hydraulic motor has uninpeachable performance in demestic motors of same kind.

ITM series'hydraulic motor Main Characteristics:

1.Low noise due to its crankshaft & con-rod structure and cylinder & piston framework of low vibration frequency;

2.Steady performance at low speed; high starting torque;

3.Good reliability and less leakage due to the flat compensation distrbutor;special seals between piston and cylider guarantee its higher volumetric efficiency;

4.Enable reversible rotation and certain external radial & axial force on output shaft;

Swing Hydraulic Motor

Categories: Hydrostatic Balance Hydraulic Motor
Brand:STF
Model:low speed, high torque,STFC100 series
Comments:hydrostatic balance design;high efficiency,starting torque, and volumetric efficiency
Update Time:11/25/2012

Detailed Info

STFC series hydraulic motors are a result of the many years' experience based on the hydrostatic balance technology,and increase the strength of the motor casings and the load capacity of internal dynamic components. By using the hydrostatic balance technology and the reduced internal friction that contribute in reducing the heat produced and therefore also the negative effects associated with it.

STFC100 series hydraulic motor Main characteristics:

1.The hydrostatic balance is built between the piston,con-rod and eccentric sets,that reduced the friction between con-rod and eccentric sets,and the side loading of pistons,lower the ball and socket of contact pressure.All above reduces the friction loss in the load transmission.Therefore STFC series hydraulic motor features mechanical efficiency and high starting torque(above90%)；

2.Using the hydrostatic balance shaft distributor to prevent the shaft tilted, good sealing capability, less leakage,under the continuous high pressure(maximum pressure up to 29MPa); 

3.The seal ring using special materials and structures to reduce the leakage and improve the volumetric efficiency;

4.The main driving parts using special materials and advanced treatment process to improve the overall service life；

5.The shape and installation of the motor can instead of Staffa,technical specification is similar with Staffa, which is the ideal choice to replace Staffa.

Due to above these advantages, STFC100 series hydraulic motor has been widely applied in all kinds of hydraulic transmission system such as plastic injection machine, ship and deck machinery construction machinery and qquipment, hoist and transport vehicle,heavy metallurgical machinery,petroleum and mine machine,light industrial equipment and drilling machine etc. In particular, it can be well available in driving screw rod of injection machine,hoisting winches and capstan,and driving various slew drives.

High Torque Hydraulic Motor

Categories: Radial Piston Hydraulic Motor
Brand:STF
Model:low speed, high torque
Comments:flat compensation distributing structure;high starting torque;excellent stability at low speed
Update Time:11/22/2012

Detailed Info

ITM series'hydraulic motor is a traditional radial piston motor what we produce for mid-pressure application.

With advanced processing center, inspection machines and assembly technology, ITM08 series hydraulic motor has uninpeachable performance in demestic motors of same kind.

ITM08 series hydraulic motor Main Characteristics:

1.Low noise due to its crankshaft & con-rod structure and cylinder & piston framework of low vibration frequency;

2.Steady performance at low speed; high starting torque;

3.Good reliability and less leakage due to the flat compensation distrbutor;special seals between piston and cylider guarantee its higher volumetric efficiency;

4.Enable reversible rotation and certain external radial & axial force on output shaft;

High Power-mass Ratio Hydraulic Motors

Categories: High Power Hydraulic Motor
Brand:STF
Model:low speed, high torque,ITMS30 series
Comments:pressure improved hydraulic motor of ITM series;integration of ITM and STF series'motor;high power-mass ratio
Update Time:11/18/2012

ITMS series' hydraulic motor integrates the advantage of ITM and STF series'motor. ITMS30 series hydraulic motors is a new concept hydraulic motors with hihger comprehensive performance;

ITMS30 series hydraulic motors Main characteristics:

1)Same structure as STF series as removed piston sleeve, integrated body case and piston cylinder hole; featured with high power-mass ratio and technical performance;

2)Applied hydrostatic oil-film modality between ball-socket of piston and ball head of con-rod to heighten its contact pressure ratio, working pressure and mechanical efficiency;

3)Special surface treatment of piston guarantees its permanent structure and low-friction seal that enables its higher volumetric and mechanical efficiency;

4)higher anti-impact and load performance due to its enhanced roller bearing;

5)Longer service life due to special materials and advanced heat treatment in main transmitting parts;

6)Same installation data as ITM series; an ideal replacement of ITM series in higher pressure & performance application.

Swing Hydraulic Motors

Categories: Radial Piston Hydraulic Motor
Brand:STF
Model:low speed, high torque
Comments:flat compensation distributing structure;high starting torque;excellent stability at low speed
Update Time:11/08/2012

Detailed Info

ITM series'hydraulic motor is a traditional radial piston motor what we produce for mid-pressure application.

With advanced processing center, inspection machines and assembly technology, ITM06 series hydraulic motor has uninpeachable performance in demestic motors of same kind.

ITM06 series hydraulic motor Main Characteristics:

1.Low noise due to its crankshaft & con-rod structure and cylinder & piston framework of low vibration frequency;

2.Steady performance at low speed; high starting torque;

3.Good reliability and less leakage due to the flat compensation distrbutor;special seals between piston and cylider guarantee its higher volumetric efficiency;

4.Enable reversible rotation and certain external radial & axial force on output shaft;

High Starting Torque Hydraulic Motor

Categories: Radial Piston Hydraulic Motor
Brand:STF
Model:low speed, high torque,ITM31 series
Comments:flat compensation distributing structure;high starting torque;excellent stability at low speed
Update Time:11/06/2012

Detailed Info

ITM series'hydraulic motor is a traditional radial piston motor what we produce for mid-pressure application.

With advanced processing center, inspection machines and assembly technology, ITM31 series hydraulic motor has uninpeachable performance in 

demestic motors of same kind.

ITM31 series hydraulic motor Main Characteristics:

1.Low noise due to its crankshaft & con-rod structure and cylinder & piston framework of low vibration frequency;

2.Steady performance at low speed; high starting torque;

3.Good reliability and less leakage due to the flat compensation distrbutor;special seals between piston and cylider guarantee its higher volumetric efficiency;

4.Enable reversible rotation and certain external radial & axial force on output shaft;

China Hydraulic Motor

• Categories:
• Radial Piston Hydraulic Motor

• Brand:
• STF

• Model:
• Low speed, High torque

• Comments:
• flat compensation distributing structure;high starting torque;excellent stability at low speed

• Update Time:
• 11/04/2012

Detailed Info

ITM series'hydraulic motor is a traditional radial piston motor what we produce for mid-pressure application.
With advanced processing center, inspection machines and assembly technology, ITM03 series hydraulic motor has uninpeachable performance in 
demestic motors of same kind.

ITM series'hydraulic motor Main Characteristics:
1.Low noise due to its crankshaft & con-rod structure and cylinder & piston framework of low vibration frequency;
2.Steady performance at low speed; high starting torque;
3.Good reliability and less leakage due to the flat compensation distrbutor;special seals between piston and cylider guarantee its higher volumetric efficiency;
4.Enable reversible rotation and certain external radial & axial force on output shaft;

Low Speed Hydraulic Motors

• Categories:
• Radial Piston Hydraulic Motor

• Brand:
• STF

• Model:
• low speed, high torque

• Comments:
• flat compensation distributing structure;high starting torque;excellent stability at low speed

• Update Time:
• 11/01/2012

Detailed Info

ITM series'hydraulic motor is a traditional radial piston motor what we produce for mid-pressure application.
With advanced processing center, inspection machines and assembly technology, ITM series'hydraulic motor has uninpeachable performance in demestic motors of same kind.

ITM series'hydraulic motor Main Characteristics:
1.Low noise due to its crankshaft & con-rod structure and cylinder & piston framework of low vibration frequency;
2.Steady performance at low speed; high starting torque;
3.Good reliability and less leakage due to the flat compensation distrbutor;special seals between piston and cylider guarantee its higher volumetric efficiency;
4.Enable reversible rotation and certain external radial & axial force on output shaft;